Factory and trade

Showing 11 - 20 of 29, total 3 pages [First] [Previous] [Next] [Last]

mobile pallet racking
Specification: 6080
Detail: The shelving units are installed over guided mobile bases that slide laterally, thus elimination the need for aisles, which open up only when accessed, it will become more co***ct and their storage capacity considerably increa...

push-back racking
Specification: 7090
Detail: Push-back racking system is made up of upright, beam, rail and trolley. These rails are built on a slight incline, lower at the front, so that the pallets at the back move forward when the pallet closest to the aisle is remove...

push-back racking
Specification: 6080
Detail: Push-back racking system is made up of upright, beam, rail and trolley. These rails are built on a slight incline, lower at the front, so that the pallets at the back move forward when the pallet closest to the aisle is remove...

live pallet racking
Specification: 70100
Detail: Live picking racking is made up of inclined platforms for wheels and rollers, on which the goods are deposited at one end. They slide down on their own until the far end, positioned at the exit aisle. It is achieved the perfec...

live pallet racking
Specification: 7090
Detail: Live picking racking is made up of inclined platforms for wheels and rollers, on which the goods are deposited at one end. They slide down on their own until the far end, positioned at the exit aisle. It is achieved the perfec...

live pallet racking
Specification: 6080
Detail: Live picking racking is made up of inclined platforms for wheels and rollers, on which the goods are deposited at one end. They slide down on their own until the far end, positioned at the exit aisle. It is achieved the perfec...

drive-in racking
Specification: 70100
Detail: Drive-in racking is made up of a set of racking units that form inner loading aisles, with support rails for the pallets. Pallets deposited acc. to depth position on the bracket shelf to get perfect density storage. Deposited ...

drive-in racking
Specification: 7090
Detail: Drive-in racking is made up of a set of racking units that form inner loading aisles, with support rails for the pallets. Pallets deposited acc. to depth position on the bracket shelf to get perfect density storage. Deposited ...

drive-in racking
Specification: 6080
Detail: Suitable for deposit rod pieces and some other that can¡¯t collected by pallet. Widely used in mechanical processing machine building materials¡¯ supermarket. Upright is made of two pieces of cold rolling C-type profile welded...

cantilever racking
Specification: 90300 middle catilever
Detail: Suitable for deposit rod pieces and some other that can¡¯t collected by pallet. Widely used in mechanical processing machine building materials¡¯ supermarket. Upright is made of two pieces of cold rolling C-type profile welded...


Showing 11 - 20 of 29, total 3 pages [First] [Previous] [Next] [Last]
1 2 3